KC1BAZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC1BAZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1776695597	15 Pkts	15 Pkts	14 Pkts	32 C
1776691997	11 Pkts	11 Pkts	10 Pkts	32 C
1776688397	8 Pkts	8 Pkts	2 Pkts	31 C
1776684798	17 Pkts	17 Pkts	5 Pkts	31 C
1776681198	15 Pkts	15 Pkts	11 Pkts	31 C
1776677597	8 Pkts	8 Pkts	4 Pkts	32 C
1776673998	21 Pkts	21 Pkts	15 Pkts	31 C
1776670397	20 Pkts	20 Pkts	12 Pkts	31 C
1776666797	14 Pkts	14 Pkts	7 Pkts	31 C
1776663197	13 Pkts	13 Pkts	6 Pkts	31 C
1776659597	6 Pkts	6 Pkts	2 Pkts	32 C
1776655997	19 Pkts	19 Pkts	8 Pkts	31 C
1776652398	9 Pkts	9 Pkts	4 Pkts	31 C
1776648797	20 Pkts	20 Pkts	9 Pkts	31 C
1776645197	11 Pkts	11 Pkts	3 Pkts	32 C
1776641597	10 Pkts	10 Pkts	2 Pkts	32 C
1776637997	5 Pkts	5 Pkts	1 Pkts	32 C
1776634397	0 Pkts	0 Pkts	0 Pkts	31 C
1776630797	7 Pkts	7 Pkts	5 Pkts	32 C
1776627197	0 Pkts	0 Pkts	0 Pkts	31 C
1776623597	16 Pkts	16 Pkts	6 Pkts	32 C
1776619998	8 Pkts	8 Pkts	5 Pkts	32 C
1776616402	8 Pkts	8 Pkts	1 Pkts	31 C
1776612798	7 Pkts	7 Pkts	3 Pkts	32 C
1776609198	0 Pkts	0 Pkts	0 Pkts	32 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)