SR9UVR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9UVR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772721601	37 Deg.C	1 %
1772721021	38 Deg.C	1 %
1772720407	37 Deg.C	1 %
1772719210	37 Deg.C	1 %
1772718607	37 Deg.C	1 %
1772718016	38 Deg.C	1 %
1772717407	38 Deg.C	1 %
1772715607	37 Deg.C	1 %
1772715020	37 Deg.C	1 %
1772713815	37 Deg.C	1 %
1772713207	37 Deg.C	1 %
1772712001	37 Deg.C	1 %
1772711402	37 Deg.C	1 %
1772710810	38 Deg.C	1 %
1772710206	37 Deg.C	1 %
1772709605	37 Deg.C	1 %
1772709007	38 Deg.C	1 %
1772708416	37 Deg.C	1 %
1772707807	37 Deg.C	1 %
1772707205	37 Deg.C	1 %
1772706601	38 Deg.C	1 %
1772706020	37 Deg.C	1 %
1772705402	37 Deg.C	1 %
1772704833	38 Deg.C	1 %
1772704201	37 Deg.C	1 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)