METHOD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object METHOD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1788682538	13.98 Volt	340 Pkt	60 Pkt	92 Pcnt	620 Pkts
1788682537	13.98 Volt	340 Pkt	60 Pkt	92 Pcnt	620 Pkts
1788681938	13.98 Volt	350 Pkt	70 Pkt	91 Pcnt	480 Pkts
1788681937	13.98 Volt	350 Pkt	70 Pkt	91 Pcnt	480 Pkts
1788681338	13.98 Volt	350 Pkt	70 Pkt	92 Pcnt	520 Pkts
1788681337	13.98 Volt	350 Pkt	70 Pkt	92 Pcnt	520 Pkts
1788680738	13.98 Volt	350 Pkt	70 Pkt	91 Pcnt	560 Pkts
1788680737	13.98 Volt	350 Pkt	70 Pkt	91 Pcnt	560 Pkts
1788680138	13.98 Volt	360 Pkt	70 Pkt	90 Pcnt	540 Pkts
1788680137	13.98 Volt	360 Pkt	70 Pkt	90 Pcnt	540 Pkts
1788679538	13.98 Volt	350 Pkt	70 Pkt	89 Pcnt	430 Pkts
1788679537	13.98 Volt	350 Pkt	70 Pkt	89 Pcnt	430 Pkts
1788678938	13.98 Volt	360 Pkt	70 Pkt	90 Pcnt	710 Pkts
1788678937	13.98 Volt	360 Pkt	70 Pkt	90 Pcnt	710 Pkts
1788678338	13.98 Volt	350 Pkt	70 Pkt	89 Pcnt	510 Pkts
1788678337	13.98 Volt	350 Pkt	70 Pkt	89 Pcnt	510 Pkts
1788677738	13.98 Volt	340 Pkt	60 Pkt	90 Pcnt	380 Pkts
1788677737	13.98 Volt	340 Pkt	60 Pkt	90 Pcnt	380 Pkts
1788677138	13.98 Volt	350 Pkt	60 Pkt	91 Pcnt	680 Pkts
1788677137	13.98 Volt	350 Pkt	60 Pkt	91 Pcnt	680 Pkts
1788676538	13.98 Volt	350 Pkt	60 Pkt	91 Pcnt	520 Pkts
1788676537	13.98 Volt	350 Pkt	60 Pkt	91 Pcnt	520 Pkts
1788675938	13.98 Volt	340 Pkt	60 Pkt	92 Pcnt	430 Pkts
1788675937	13.98 Volt	340 Pkt	60 Pkt	92 Pcnt	430 Pkts
1788675339	13.98 Volt	340 Pkt	60 Pkt	92 Pcnt	600 Pkts

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)