EL-EA3RCI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-EA3RCI. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1776624903	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	18 TXcount/10m
1776623104	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	8 TXcount/10m
1776621303	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	11 TXcount/10m
1776619503	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	8 TXcount/10m
1776617703	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	21 TXcount/10m
1776615903	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	34 TXcount/10m
1776614103	0 RX Erlang	0.51 TX Erlang	0 RXcount/10m	37 TXcount/10m
1776612303	0 RX Erlang	0.26 TX Erlang	0 RXcount/10m	37 TXcount/10m
1776610503	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1776608703	0 RX Erlang	0.03 TX Erlang	1 RXcount/10m	13 TXcount/10m
1776606903	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	14 TXcount/10m
1776605103	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	9 TXcount/10m
1776603303	0 RX Erlang	0.02 TX Erlang	1 RXcount/10m	8 TXcount/10m
1776601503	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	12 TXcount/10m
1776599703	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	11 TXcount/10m
1776597903	0 RX Erlang	0.26 TX Erlang	0 RXcount/10m	33 TXcount/10m
1776596103	0 RX Erlang	0.26 TX Erlang	0 RXcount/10m	27 TXcount/10m
1776594303	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	8 TXcount/10m
1776592503	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1776590703	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	13 TXcount/10m
1776588903	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	11 TXcount/10m
1776587104	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	13 TXcount/10m
1776585304	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	21 TXcount/10m
1776583503	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1776581703	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	25 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)