VK4RPR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RPR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784776469	13.58 Volt	440 Pkt	110 Pkt	94 Pcnt
1784775872	13.58 Volt	420 Pkt	110 Pkt	93 Pcnt
1784775271	13.58 Volt	430 Pkt	110 Pkt	94 Pcnt
1784774669	13.58 Volt	430 Pkt	110 Pkt	94 Pcnt
1784774069	13.58 Volt	420 Pkt	100 Pkt	92 Pcnt
1784773469	13.58 Volt	430 Pkt	100 Pkt	92 Pcnt
1784772869	13.58 Volt	440 Pkt	100 Pkt	93 Pcnt
1784772272	13.58 Volt	430 Pkt	100 Pkt	92 Pcnt
1784771669	13.58 Volt	480 Pkt	100 Pkt	92 Pcnt
1784771069	13.58 Volt	490 Pkt	110 Pkt	92 Pcnt
1784770469	13.58 Volt	540 Pkt	120 Pkt	92 Pcnt
1784769272	13.58 Volt	610 Pkt	130 Pkt	91 Pcnt
1784768672	13.58 Volt	630 Pkt	140 Pkt	90 Pcnt
1784768069	13.58 Volt	660 Pkt	140 Pkt	89 Pcnt
1784767470	13.58 Volt	670 Pkt	150 Pkt	89 Pcnt
1784766870	13.58 Volt	690 Pkt	160 Pkt	88 Pcnt
1784766269	13.5 Volt	690 Pkt	160 Pkt	88 Pcnt
1784765669	13.43 Volt	650 Pkt	160 Pkt	86 Pcnt
1784765079	13.58 Volt	630 Pkt	160 Pkt	86 Pcnt
1784764469	13.58 Volt	610 Pkt	150 Pkt	85 Pcnt
1784763870	13.58 Volt	580 Pkt	140 Pkt	85 Pcnt
1784763269	13.58 Volt	520 Pkt	130 Pkt	85 Pcnt
1784762670	13.58 Volt	490 Pkt	110 Pkt	86 Pcnt
1784762070	13.58 Volt	470 Pkt	100 Pkt	87 Pcnt
1784761473	13.58 Volt	440 Pkt	100 Pkt	86 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)