TA6BDL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA6BDL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1757659158	41 Pkt	-64 dBm	0.04 V
1757658422	40 Pkt	-64 dBm	0.04 V
1757657692	38 Pkt	-62 dBm	0.04 V
1757656962	28 Pkt	-64 dBm	0.04 V
1757656232	22 Pkt	-63 dBm	0.04 V
1757655502	26 Pkt	-64 dBm	0.04 V
1757654772	24 Pkt	-64 dBm	0.04 V
1757654042	25 Pkt	-64 dBm	0.04 V
1757653312	24 Pkt	-64 dBm	0.04 V
1757652582	21 Pkt	-63 dBm	0.04 V
1757651852	21 Pkt	-64 dBm	0.04 V
1757651122	25 Pkt	-64 dBm	0.04 V
1757650392	27 Pkt	-64 dBm	0.04 V
1757649662	26 Pkt	-64 dBm	0.04 V
1757648932	27 Pkt	-64 dBm	0.04 V
1757648202	25 Pkt	-64 dBm	0.04 V
1757647472	27 Pkt	-64 dBm	0.04 V
1757646742	22 Pkt	-65 dBm	0.04 V
1757646012	16 Pkt	-64 dBm	0.04 V
1757645282	22 Pkt	-64 dBm	0.04 V
1757644552	21 Pkt	-65 dBm	0.04 V
1757643822	29 Pkt	-65 dBm	0.04 V
1757643092	17 Pkt	-64 dBm	0.04 V
1757642362	29 Pkt	-63 dBm	0.04 V
1757641631	24 Pkt	-65 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)