HP2PCN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2PCN-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1789956115	13.43 Volt	130 Pkt	60 Pkt	61 Pcnt	65 Pcnt
1789955515	13.43 Volt	130 Pkt	60 Pkt	61 Pcnt	65 Pcnt
1789954915	13.43 Volt	130 Pkt	60 Pkt	66 Pcnt	65 Pcnt
1789954315	13.43 Volt	150 Pkt	70 Pkt	69 Pcnt	65 Pcnt
1789953134	13.43 Volt	160 Pkt	60 Pkt	76 Pcnt	65 Pcnt
1789952515	13.43 Volt	190 Pkt	70 Pkt	78 Pcnt	65 Pcnt
1789951915	13.43 Volt	200 Pkt	70 Pkt	76 Pcnt	65 Pcnt
1789951315	13.43 Volt	220 Pkt	70 Pkt	74 Pcnt	65 Pcnt
1789950715	13.43 Volt	220 Pkt	70 Pkt	72 Pcnt	65 Pcnt
1789950115	13.43 Volt	230 Pkt	80 Pkt	70 Pcnt	65 Pcnt
1789949515	13.43 Volt	220 Pkt	70 Pkt	68 Pcnt	65 Pcnt
1789948315	13.43 Volt	200 Pkt	70 Pkt	70 Pcnt	65 Pcnt
1789947715	13.43 Volt	190 Pkt	70 Pkt	70 Pcnt	65 Pcnt
1789947115	13.43 Volt	170 Pkt	60 Pkt	69 Pcnt	65 Pcnt
1789946517	13.43 Volt	170 Pkt	60 Pkt	70 Pcnt	65 Pcnt
1789945915	13.43 Volt	160 Pkt	50 Pkt	69 Pcnt	65 Pcnt
1789945315	13.43 Volt	150 Pkt	50 Pkt	66 Pcnt	65 Pcnt
1789944715	13.43 Volt	150 Pkt	50 Pkt	65 Pcnt	65 Pcnt
1789944115	13.43 Volt	140 Pkt	50 Pkt	60 Pcnt	65 Pcnt
1789943515	13.43 Volt	140 Pkt	50 Pkt	59 Pcnt	65 Pcnt
1789942915	13.43 Volt	140 Pkt	60 Pkt	59 Pcnt	65 Pcnt
1789942315	13.43 Volt	160 Pkt	60 Pkt	57 Pcnt	65 Pcnt
1789941716	13.43 Volt	160 Pkt	60 Pkt	58 Pcnt	65 Pcnt
1789941115	13.43 Volt	160 Pkt	70 Pkt	55 Pcnt	65 Pcnt
1789940517	13.43 Volt	170 Pkt	70 Pkt	56 Pcnt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)