HS5TQA-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*	SAT*
1787552897	33.93 °C	75.8 %RH	998.1 hPa	14.03 V	24
1787552648	33.59 °C	76.2 %RH	998.3 hPa	14.19 V	23
1787551928	32.38 °C	78.8 %RH	998.4 hPa	14.32 V	23
1787551433	31.42 °C	77.1 %RH	998.6 hPa	14.37 V	22
1787551379	31.26 °C	76.5 %RH	998.7 hPa	14.36 V	21
1787551322	31.17 °C	76.4 %RH	998.7 hPa	14.36 V	19
1787551301	31.11 °C	75.8 %RH	998.7 hPa	14.36 V	18
1787551243	30.96 °C	75 %RH	998.8 hPa	14.31 V	18
1787551225	30.92 °C	75.1 %RH	998.8 hPa	14.3 V	19
1787551183	30.82 °C	74.7 %RH	998.8 hPa	14.31 V	21
1787551156	30.77 °C	74.6 %RH	998.8 hPa	14.32 V	20
1787551138	30.74 °C	74 %RH	998.7 hPa	14.32 V	25
1787550824	30.24 °C	65.7 %RH	998.7 hPa	14.04 V	29
1787550817	30.25 °C	65.5 %RH	998.7 hPa	14.1 V	27
1787550489	30.03 °C	67 %RH	998.9 hPa	14.04 V	29
1787549682	30.01 °C	71.3 %RH	998.7 hPa	14.28 V	29
1787549170	29.95 °C	70.7 %RH	994 hPa	14.28 V	30
1787548416	29.22 °C	74.1 %RH	995.9 hPa	13.65 V	30
1787546554	28.12 °C	74.3 %RH	994.7 hPa	14.06 V	30
1787546378	28.08 °C	75.8 %RH	993 hPa	14.09 V	30
1787543948	28.11 °C	79.2 %RH	994.7 hPa	14.32 V	26
1787543269	28.51 °C	98.5 %RH	979.5 hPa	13.5 V	28
1787542200	28.69 °C	98.2 %RH	979.7 hPa	13.49 V	29
1787541540	27.66 °C	100 %RH	979.8 hPa	13.49 V	28
1787540932	27.46 °C	100 %RH	979.7 hPa	13.5 V	29

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)