SR8KP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8KP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1780568405	37 Deg.C	5 %
1780567801	36 Deg.C	5 %
1780567205	37 Deg.C	5 %
1780566601	38 Deg.C	5 %
1780566002	37 Deg.C	5 %
1780565405	36 Deg.C	5 %
1780564801	37 Deg.C	5 %
1780564205	38 Deg.C	5 %
1780563601	37 Deg.C	5 %
1780563005	39 Deg.C	5 %
1780562402	38 Deg.C	5 %
1780561802	38 Deg.C	5 %
1780561205	38 Deg.C	5 %
1780560601	37 Deg.C	5 %
1780560005	37 Deg.C	5 %
1780559402	39 Deg.C	5 %
1780558806	39 Deg.C	5 %
1780558202	38 Deg.C	5 %
1780557602	39 Deg.C	5 %
1780557005	38 Deg.C	5 %
1780556402	38 Deg.C	5 %
1780555202	38 Deg.C	5 %
1780554605	38 Deg.C	5 %
1780554002	38 Deg.C	5 %
1780553401	39 Deg.C	5 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)