SR2INO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2INO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761526081	0.01 Rx Erlang	0 Tx Erlang	11 count/10m	0 count/10m	4 count/10m
1761524880	0.02 Rx Erlang	0 Tx Erlang	14 count/10m	0 count/10m	3 count/10m
1761523681	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	4 count/10m
1761522486	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1761521281	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1761520080	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1761518880	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	5 count/10m
1761516480	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1761515281	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	5 count/10m
1761514080	0.01 Rx Erlang	0 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1761512880	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	3 count/10m
1761511680	0.01 Rx Erlang	0 Tx Erlang	3 count/10m	0 count/10m	3 count/10m
1761510480	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	10 count/10m
1761509280	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	8 count/10m
1761506881	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	6 count/10m
1761505680	0.02 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	8 count/10m
1761504481	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	8 count/10m
1761503280	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	5 count/10m
1761500881	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	7 count/10m
1761499680	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	7 count/10m
1761498480	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	11 count/10m
1761496080	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	7 count/10m
1761494880	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	7 count/10m
1761493681	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	6 count/10m
1761491280	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)