IR2E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2E. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1761505932	1 Pkt	10 Pkt	0 Pkt	0 Pkt	90 Pcnt
1761499625	1 Pkt	0 Pkt	0 Pkt	0 Pkt	85 Pcnt
1761432059	6 Pkt	40 Pkt	4 Pkt	20 Pkt	95 Pcnt
1761431159	8 Pkt	40 Pkt	6 Pkt	30 Pkt	93 Pcnt
1761377106	5 Pkt	30 Pkt	2 Pkt	20 Pkt	82 Pcnt
1761356385	6 Pkt	10 Pkt	4 Pkt	10 Pkt	47 Pcnt
1761345575	3 Pkt	10 Pkt	2 Pkt	0 Pkt	34 Pcnt
1761336566	3 Pkt	20 Pkt	1 Pkt	10 Pkt	88 Pcnt
1761335667	5 Pkt	20 Pkt	2 Pkt	10 Pkt	93 Pcnt
1761333863	4 Pkt	30 Pkt	2 Pkt	10 Pkt	94 Pcnt
1761332062	6 Pkt	30 Pkt	2 Pkt	10 Pkt	91 Pcnt
1761331161	5 Pkt	30 Pkt	3 Pkt	10 Pkt	91 Pcnt
1761330260	5 Pkt	30 Pkt	2 Pkt	20 Pkt	89 Pcnt
1761328458	6 Pkt	20 Pkt	2 Pkt	10 Pkt	90 Pcnt
1761290621	6 Pkt	30 Pkt	4 Pkt	20 Pkt	68 Pcnt
1761259091	4 Pkt	20 Pkt	2 Pkt	10 Pkt	55 Pcnt
1761256392	3 Pkt	20 Pkt	2 Pkt	10 Pkt	69 Pcnt
1761248280	5 Pkt	30 Pkt	2 Pkt	10 Pkt	76 Pcnt
1761247379	7 Pkt	30 Pkt	5 Pkt	10 Pkt	76 Pcnt
1761244676	2 Pkt	20 Pkt	1 Pkt	10 Pkt	71 Pcnt
1761243776	2 Pkt	20 Pkt	1 Pkt	10 Pkt	65 Pcnt
1761242875	5 Pkt	20 Pkt	2 Pkt	10 Pkt	67 Pcnt
1761241073	6 Pkt	30 Pkt	4 Pkt	10 Pkt	69 Pcnt
1761239271	2 Pkt	30 Pkt	0 Pkt	20 Pkt	74 Pcnt
1761236568	8 Pkt	50 Pkt	5 Pkt	30 Pkt	83 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)