VK4RJW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RJW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784733257	12.38 Volt	120 Pkt	20 Pkt	33 Pcnt	25.5 C
1784733256	12.38 Volt	120 Pkt	20 Pkt	33 Pcnt	25.5 C
1784732956	12.38 Volt	120 Pkt	20 Pkt	30 Pcnt	25.5 C
1784732657	12.38 Volt	70 Pkt	10 Pkt	30 Pcnt	25.5 C
1784732656	12.38 Volt	70 Pkt	10 Pkt	30 Pcnt	25.5 C
1784732356	12.38 Volt	50 Pkt	0 Pkt	30 Pcnt	25.5 C
1784732057	12.38 Volt	70 Pkt	0 Pkt	30 Pcnt	25.5 C
1784732056	12.38 Volt	70 Pkt	0 Pkt	30 Pcnt	25.5 C
1784731756	12.38 Volt	150 Pkt	30 Pkt	29 Pcnt	25.5 C
1784731460	12.38 Volt	80 Pkt	30 Pkt	29 Pcnt	26 C
1784731456	12.38 Volt	80 Pkt	30 Pkt	29 Pcnt	26 C
1784731156	12.38 Volt	40 Pkt	0 Pkt	31 Pcnt	25.5 C
1784730857	12.38 Volt	80 Pkt	0 Pkt	32 Pcnt	26 C
1784730856	12.38 Volt	80 Pkt	0 Pkt	32 Pcnt	26 C
1784730556	12.38 Volt	160 Pkt	0 Pkt	32 Pcnt	26 C
1784730257	12.38 Volt	120 Pkt	10 Pkt	31 Pcnt	26 C
1784730256	12.38 Volt	120 Pkt	10 Pkt	31 Pcnt	26 C
1784729956	12.38 Volt	90 Pkt	30 Pkt	31 Pcnt	26 C
1784729657	12.38 Volt	80 Pkt	30 Pkt	31 Pcnt	26 C
1784729656	12.38 Volt	80 Pkt	30 Pkt	31 Pcnt	26 C
1784729356	12.38 Volt	90 Pkt	0 Pkt	31 Pcnt	26 C
1784729057	12.38 Volt	70 Pkt	0 Pkt	31 Pcnt	26 C
1784729056	12.38 Volt	70 Pkt	0 Pkt	31 Pcnt	26 C
1784728756	12.38 Volt	60 Pkt	0 Pkt	33 Pcnt	26 C
1784728457	12.38 Volt	90 Pkt	0 Pkt	32 Pcnt	26 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)