S53UAN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S53UAN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	U1*	U2*	Rx1h*	Eff*
1772529751	5 C	13.05 Volt	14.2 Volt	1530 Pkt	62 Pcnt
1772529433	5 C	12.9 Volt	13.1 Volt	1510 Pkt	62 Pcnt
1772528533	5 C	13.05 Volt	13.3 Volt	1540 Pkt	62 Pcnt
1772527633	4.5 C	13.05 Volt	13.1 Volt	1540 Pkt	62 Pcnt
1772526755	4.5 C	12.6 Volt	15.5 Volt	1530 Pkt	62 Pcnt
1772526733	4.5 C	12.6 Volt	15.5 Volt	1530 Pkt	62 Pcnt
1772525833	4.5 C	12.53 Volt	13.1 Volt	1490 Pkt	62 Pcnt
1772524933	4.5 C	12.45 Volt	12.5 Volt	1440 Pkt	62 Pcnt
1772524033	4.5 C	12.53 Volt	12.7 Volt	1420 Pkt	62 Pcnt
1772523768	4.5 C	12.53 Volt	12.8 Volt	1410 Pkt	62 Pcnt
1772523133	4.5 C	12.45 Volt	12.4 Volt	1430 Pkt	62 Pcnt
1772522233	5 C	12.45 Volt	12.2 Volt	1430 Pkt	62 Pcnt
1772521333	4.5 C	12.45 Volt	12.3 Volt	1440 Pkt	62 Pcnt
1772520741	4.5 C	12.45 Volt	12.2 Volt	1440 Pkt	62 Pcnt
1772520443	5 C	12.45 Volt	12.1 Volt	1440 Pkt	62 Pcnt
1772519543	5 C	12.45 Volt	12 Volt	1470 Pkt	62 Pcnt
1772518634	5 C	12.45 Volt	12 Volt	1460 Pkt	62 Pcnt
1772517740	5 C	12.45 Volt	11.9 Volt	1500 Pkt	62 Pcnt
1772517734	5 C	12.45 Volt	11.9 Volt	1500 Pkt	62 Pcnt
1772516834	5 C	12.45 Volt	11.9 Volt	1490 Pkt	62 Pcnt
1772515934	5 C	12.45 Volt	11.9 Volt	1440 Pkt	62 Pcnt
1772515034	5 C	12.45 Volt	11.9 Volt	1450 Pkt	62 Pcnt
1772514746	5 C	12.45 Volt	11.9 Volt	1450 Pkt	62 Pcnt
1772514134	5 C	12.45 Volt	11.9 Volt	1450 Pkt	62 Pcnt
1772513234	5 C	12.45 Volt	11.9 Volt	1460 Pkt	62 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

U1: 0, 0.075, 0

U2: 0, 0.1, 0

Rx1h: 0, 10, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)