EL-CE7DNN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-CE7DNN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1753826148	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	18 TXcount/10m
1753825548	0 RX Erlang	0.54 TX Erlang	0 RXcount/10m	26 TXcount/10m
1753824982	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	13 TXcount/10m
1753824348	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753823748	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	10 TXcount/10m
1753822548	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753821948	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753821348	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	10 TXcount/10m
1753820148	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	11 TXcount/10m
1753819548	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	8 TXcount/10m
1753818948	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753818348	0 RX Erlang	0.25 TX Erlang	0 RXcount/10m	18 TXcount/10m
1753817171	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753816548	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753815948	0 RX Erlang	0.06 TX Erlang	2 RXcount/10m	6 TXcount/10m
1753815348	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753814748	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	18 TXcount/10m
1753814148	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	10 TXcount/10m
1753813548	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	31 TXcount/10m
1753812948	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	26 TXcount/10m
1753811753	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	28 TXcount/10m
1753811148	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	26 TXcount/10m
1753809349	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	21 TXcount/10m
1753808148	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	23 TXcount/10m
1753806948	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	15 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)