VK2RZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1789954605	0.77 Load	56 DegC	1394 Mb	823 Pkt	619 Pkt
1789954005	0.9 Load	53 DegC	1430 Mb	1233 Pkt	1923 Pkt
1789953404	0.85 Load	53 DegC	1426 Mb	742 Pkt	1083 Pkt
1789952804	0.8 Load	54 DegC	1409 Mb	1047 Pkt	632 Pkt
1789952204	0.87 Load	56 DegC	1429 Mb	813 Pkt	1395 Pkt
1789951604	0.81 Load	56 DegC	1428 Mb	709 Pkt	1130 Pkt
1789951005	0.91 Load	56 DegC	1396 Mb	1135 Pkt	1234 Pkt
1789950405	0.85 Load	58 DegC	1423 Mb	817 Pkt	1282 Pkt
1789949805	0.78 Load	57 DegC	1419 Mb	825 Pkt	1099 Pkt
1789949204	0.78 Load	53 DegC	1418 Mb	1022 Pkt	641 Pkt
1789948604	0.85 Load	52 DegC	1409 Mb	823 Pkt	1317 Pkt
1789948004	0.79 Load	52 DegC	1424 Mb	850 Pkt	1229 Pkt
1789947405	0.79 Load	51 DegC	1406 Mb	694 Pkt	559 Pkt
1789946805	0.74 Load	54 DegC	1422 Mb	827 Pkt	1254 Pkt
1789946205	0.93 Load	54 DegC	1416 Mb	798 Pkt	1094 Pkt
1789945605	0.87 Load	53 DegC	1425 Mb	1108 Pkt	613 Pkt
1789945005	0.73 Load	55 DegC	1418 Mb	842 Pkt	1445 Pkt
1789944404	0.69 Load	55 DegC	1425 Mb	843 Pkt	1111 Pkt
1789943804	0.76 Load	54 DegC	1405 Mb	701 Pkt	587 Pkt
1789943205	0.79 Load	53 DegC	1417 Mb	847 Pkt	1330 Pkt
1789942605	0.87 Load	52 DegC	1429 Mb	930 Pkt	1265 Pkt
1789942005	0.96 Load	54 DegC	1429 Mb	1353 Pkt	835 Pkt
1789941405	0.96 Load	53 DegC	1441 Mb	813 Pkt	1242 Pkt
1789940805	0.74 Load	53 DegC	1435 Mb	791 Pkt	1115 Pkt
1789940205	0.9 Load	53 DegC	1425 Mb	732 Pkt	563 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)