9W2FRP-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2FRP-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1757573095	0.09 Load	49.39 DegC	287 Mb	637 Pkt	69 Pkt
1757572796	0.05 Load	49.39 DegC	291 Mb	629 Pkt	67 Pkt
1757572495	0.07 Load	48.31 DegC	289 Mb	660 Pkt	131 Pkt
1757572196	0.1 Load	48.31 DegC	292 Mb	680 Pkt	84 Pkt
1757571895	0.1 Load	46.16 DegC	294 Mb	684 Pkt	121 Pkt
1757571597	0.08 Load	45.62 DegC	286 Mb	657 Pkt	57 Pkt
1757571294	0.04 Load	45.08 DegC	299 Mb	683 Pkt	122 Pkt
1757570997	0.06 Load	45.08 DegC	292 Mb	663 Pkt	72 Pkt
1757570695	0.06 Load	45.08 DegC	305 Mb	769 Pkt	239 Pkt
1757570396	0.11 Load	45.08 DegC	290 Mb	628 Pkt	52 Pkt
1757570095	0.18 Load	45.08 DegC	296 Mb	680 Pkt	91 Pkt
1757569796	0.05 Load	46.16 DegC	291 Mb	676 Pkt	130 Pkt
1757569495	0.04 Load	47.24 DegC	299 Mb	670 Pkt	77 Pkt
1757569197	0.06 Load	48.31 DegC	293 Mb	860 Pkt	110 Pkt
1757568895	0.08 Load	49.93 DegC	295 Mb	844 Pkt	140 Pkt
1757568597	0.07 Load	49.39 DegC	301 Mb	868 Pkt	69 Pkt
1757568294	0.05 Load	50.46 DegC	293 Mb	817 Pkt	68 Pkt
1757567996	0.08 Load	49.39 DegC	296 Mb	897 Pkt	121 Pkt
1757567694	0.04 Load	50.46 DegC	295 Mb	970 Pkt	82 Pkt
1757567396	0.07 Load	50.46 DegC	287 Mb	892 Pkt	123 Pkt
1757567095	0.07 Load	49.93 DegC	305 Mb	884 Pkt	181 Pkt
1757566796	0.11 Load	49.93 DegC	294 Mb	832 Pkt	70 Pkt
1757566494	0.14 Load	50.46 DegC	292 Mb	993 Pkt	217 Pkt
1757566197	0.09 Load	49.93 DegC	298 Mb	934 Pkt	143 Pkt
1757565895	0.09 Load	49.93 DegC	289 Mb	926 Pkt	169 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)