DL5GNH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL5GNH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761887805	12.15 Volt	250 Pkt	100 Pkt	77 Pcnt
1761887506	12.15 Volt	240 Pkt	100 Pkt	78 Pcnt
1761887505	12.15 Volt	240 Pkt	100 Pkt	78 Pcnt
1761887205	12.15 Volt	240 Pkt	100 Pkt	78 Pcnt
1761886906	12.15 Volt	240 Pkt	100 Pkt	78 Pcnt
1761886905	12.15 Volt	240 Pkt	100 Pkt	78 Pcnt
1761886605	12.15 Volt	230 Pkt	100 Pkt	77 Pcnt
1761886306	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761886305	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761886005	12.15 Volt	230 Pkt	90 Pkt	77 Pcnt
1761885706	12.15 Volt	220 Pkt	90 Pkt	77 Pcnt
1761885705	12.15 Volt	220 Pkt	90 Pkt	77 Pcnt
1761885405	12.15 Volt	230 Pkt	100 Pkt	79 Pcnt
1761885106	12.15 Volt	230 Pkt	100 Pkt	80 Pcnt
1761885105	12.15 Volt	230 Pkt	100 Pkt	80 Pcnt
1761884805	12.15 Volt	240 Pkt	100 Pkt	80 Pcnt
1761884506	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761884505	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761884205	12.15 Volt	230 Pkt	100 Pkt	79 Pcnt
1761883906	12.15 Volt	230 Pkt	100 Pkt	79 Pcnt
1761883905	12.15 Volt	230 Pkt	100 Pkt	79 Pcnt
1761883605	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761883306	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761883305	12.15 Volt	230 Pkt	100 Pkt	78 Pcnt
1761883005	12.15 Volt	250 Pkt	100 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)