VK5BRC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5BRC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1hr*	Dig1h*	Eff1h*
1757565839	14.4 Volt	40 Pkt	1 Pkt	95 Pcnt
1757562236	14.4 Volt	44 Pkt	1 Pkt	96 Pcnt
1757558633	14.4 Volt	48 Pkt	1 Pkt	94 Pcnt
1757555029	14.4 Volt	45 Pkt	2 Pkt	90 Pcnt
1757551426	14.4 Volt	36 Pkt	1 Pkt	94 Pcnt
1757547822	14.4 Volt	33 Pkt	1 Pkt	95 Pcnt
1757544219	14.4 Volt	36 Pkt	1 Pkt	95 Pcnt
1757540616	14.4 Volt	28 Pkt	1 Pkt	96 Pcnt
1757537012	14.4 Volt	43 Pkt	3 Pkt	94 Pcnt
1757533409	14.4 Volt	28 Pkt	1 Pkt	95 Pcnt
1757526202	14.4 Volt	30 Pkt	1 Pkt	98 Pcnt
1757522599	14.4 Volt	28 Pkt	1 Pkt	97 Pcnt
1757518995	14.4 Volt	27 Pkt	1 Pkt	97 Pcnt
1757515392	14.4 Volt	29 Pkt	1 Pkt	98 Pcnt
1757511800	14.4 Volt	33 Pkt	1 Pkt	97 Pcnt
1757508185	14.4 Volt	28 Pkt	1 Pkt	97 Pcnt
1757504582	14.4 Volt	26 Pkt	1 Pkt	94 Pcnt
1757500979	14.4 Volt	26 Pkt	1 Pkt	96 Pcnt
1757497375	14.4 Volt	33 Pkt	2 Pkt	94 Pcnt
1757493771	14.4 Volt	38 Pkt	1 Pkt	94 Pcnt
1757490168	14.4 Volt	37 Pkt	1 Pkt	94 Pcnt
1757486565	14.4 Volt	26 Pkt	1 Pkt	94 Pcnt
1757482961	14.4 Volt	42 Pkt	2 Pkt	94 Pcnt
1757479358	14.4 Volt	35 Pkt	1 Pkt	95 Pcnt
1757475754	14.4 Volt	38 Pkt	1 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1hr: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)