IZ1UQG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1UQG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765565043	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765564728	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765564428	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765564128	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765563828	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765563529	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765563229	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765562929	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765562629	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765562329	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765562029	12.98 Volt	30 Pkt	10 Pkt	94 Pcnt
1765561729	12.98 Volt	30 Pkt	10 Pkt	95 Pcnt
1765561429	12.98 Volt	30 Pkt	10 Pkt	95 Pcnt
1765561129	12.98 Volt	30 Pkt	10 Pkt	95 Pcnt
1765560829	12.98 Volt	30 Pkt	10 Pkt	92 Pcnt
1765560529	12.98 Volt	40 Pkt	10 Pkt	93 Pcnt
1765560229	12.98 Volt	30 Pkt	10 Pkt	95 Pcnt
1765559929	12.98 Volt	40 Pkt	10 Pkt	95 Pcnt
1765559629	12.98 Volt	40 Pkt	10 Pkt	95 Pcnt
1765559329	12.98 Volt	40 Pkt	10 Pkt	95 Pcnt
1765559029	12.98 Volt	40 Pkt	10 Pkt	96 Pcnt
1765558729	12.98 Volt	50 Pkt	10 Pkt	94 Pcnt
1765558429	12.98 Volt	40 Pkt	10 Pkt	96 Pcnt
1765558129	12.98 Volt	50 Pkt	10 Pkt	96 Pcnt
1765557829	12.98 Volt	40 Pkt	10 Pkt	96 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)