DG0OPK-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG0OPK-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1774262269	960.7 hPa	32.2 C deg	1016.1 hPa	20.1 C deg
1774260454	960.6 hPa	32.2 C deg	1016 hPa	20.1 C deg
1774258638	960.4 hPa	32.2 C deg	1015.8 hPa	20.1 C deg
1774256823	960.3 hPa	32.2 C deg	1015.6 hPa	20.1 C deg
1774255008	960 hPa	32.2 C deg	1015.3 hPa	20.1 C deg
1774253193	959.9 hPa	32.2 C deg	1015.2 hPa	20.1 C deg
1774251378	959.6 hPa	32.1 C deg	1014.9 hPa	19.9 C deg
1774249563	959.3 hPa	32.2 C deg	1014.6 hPa	19.9 C deg
1774247748	959 hPa	32.4 C deg	1014.3 hPa	19.9 C deg
1774245933	958.7 hPa	32.3 C deg	1013.9 hPa	19.9 C deg
1774244118	958.3 hPa	32.2 C deg	1013.5 hPa	19.7 C deg
1774242303	957.9 hPa	32.2 C deg	1013.1 hPa	19.1 C deg
1774240487	957.7 hPa	32.5 C deg	1012.9 hPa	20.2 C deg
1774238672	957.5 hPa	32.5 C deg	1012.6 hPa	20.3 C deg
1774236857	957.3 hPa	32.5 C deg	1012.4 hPa	20.2 C deg
1774235042	957.1 hPa	32.5 C deg	1012.3 hPa	20.2 C deg
1774233227	956.9 hPa	32.5 C deg	1012 hPa	20.3 C deg
1774231412	956.6 hPa	32.4 C deg	1011.7 hPa	20.2 C deg
1774229597	956.7 hPa	32.4 C deg	1011.8 hPa	20.2 C deg
1774227782	956.4 hPa	32.5 C deg	1011.5 hPa	20.3 C deg
1774225967	956.3 hPa	32.4 C deg	1011.3 hPa	20.3 C deg
1774224151	956.1 hPa	32.1 C deg	1011.2 hPa	20.1 C deg
1774222336	956 hPa	28.3 C deg	1011.8 hPa	20.7 C deg
1774220662	955.9 hPa	29.3 C deg	1011.5 hPa	20.1 C deg
1774218844	955.9 hPa	29.3 C deg	1011.5 hPa	20.1 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)