E21TMW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E21TMW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1788680758	3 Pkt	3 Pkt	2 Pkt	54 dB	19200 bps
1788680458	3 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788680158	3 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788679859	4 Pkt	4 Pkt	2 Pkt	54 dB	19200 bps
1788679558	4 Pkt	3 Pkt	3 Pkt	55 dB	19200 bps
1788679258	3 Pkt	3 Pkt	3 Pkt	55 dB	19200 bps
1788678958	5 Pkt	4 Pkt	1 Pkt	55 dB	19200 bps
1788678658	11 Pkt	4 Pkt	4 Pkt	55 dB	19200 bps
1788678358	3 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788678058	3 Pkt	3 Pkt	3 Pkt	54 dB	19200 bps
1788677758	3 Pkt	3 Pkt	2 Pkt	56 dB	19200 bps
1788677458	3 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788677158	3 Pkt	3 Pkt	4 Pkt	56 dB	19200 bps
1788676858	3 Pkt	3 Pkt	2 Pkt	56 dB	19200 bps
1788676558	3 Pkt	3 Pkt	2 Pkt	58 dB	19200 bps
1788676258	2 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788675958	3 Pkt	3 Pkt	2 Pkt	55 dB	19200 bps
1788675658	3 Pkt	3 Pkt	2 Pkt	57 dB	19200 bps
1788675358	3 Pkt	3 Pkt	4 Pkt	57 dB	19200 bps
1788675058	3 Pkt	3 Pkt	3 Pkt	58 dB	19200 bps
1788674759	3 Pkt	3 Pkt	3 Pkt	55 dB	19200 bps
1788674458	2 Pkt	3 Pkt	3 Pkt	56 dB	19200 bps
1788674158	3 Pkt	3 Pkt	2 Pkt	56 dB	19200 bps
1788673858	4 Pkt	3 Pkt	4 Pkt	57 dB	19200 bps
1788673577	3 Pkt	3 Pkt	2 Pkt	56 dB	19200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)