SA2TMS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA2TMS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Basemnt*	Outsid*	Ktchn*	I_PV*
1788649908	9.8 Deg.C	4.06 Deg.C	20.94 Deg.C	0 mA
1788649448	9.4 Deg.C	3.75 Deg.C	21.25 Deg.C	0 mA
1788648893	9.5 Deg.C	3.44 Deg.C	21.25 Deg.C	0 mA
1788648575	9.4 Deg.C	3.44 Deg.C	21.25 Deg.C	0 mA
1788624015	13.2 Deg.C	13.75 Deg.C	21.88 Deg.C	3 mA
1788623620	13.3 Deg.C	14.38 Deg.C	21.88 Deg.C	6 mA
1788622601	13.3 Deg.C	14.06 Deg.C	21.88 Deg.C	6 mA
1788616556	13.4 Deg.C	15.94 Deg.C	21.88 Deg.C	12 mA
1788613128	13.6 Deg.C	17.19 Deg.C	22.19 Deg.C	13 mA
1788611843	13.8 Deg.C	16.56 Deg.C	22.19 Deg.C	10 mA
1788610951	13.8 Deg.C	18.75 Deg.C	22.5 Deg.C	71 mA
1788609990	13.7 Deg.C	15.63 Deg.C	22.19 Deg.C	12 mA
1788607520	14 Deg.C	17.19 Deg.C	22.5 Deg.C	98 mA
1788605361	13.6 Deg.C	16.88 Deg.C	22.19 Deg.C	88 mA
1788604761	13.5 Deg.C	15.94 Deg.C	22.19 Deg.C	94 mA
1788604382	13.5 Deg.C	15.94 Deg.C	22.19 Deg.C	99 mA
1788604037	13.4 Deg.C	16.25 Deg.C	22.19 Deg.C	97 mA
1788603686	13.3 Deg.C	15.94 Deg.C	22.19 Deg.C	97 mA
1788602766	13.1 Deg.C	15.31 Deg.C	21.88 Deg.C	102 mA
1788601245	12.8 Deg.C	13.75 Deg.C	21.25 Deg.C	20 mA
1788600377	12.8 Deg.C	13.44 Deg.C	21.88 Deg.C	116 mA
1788599522	12.7 Deg.C	15 Deg.C	22.19 Deg.C	108 mA
1788599121	12.6 Deg.C	13.13 Deg.C	21.88 Deg.C	21 mA
1788598550	12.8 Deg.C	15.31 Deg.C	21.88 Deg.C	31 mA
1788596661	12.4 Deg.C	12.81 Deg.C	21.25 Deg.C	27 mA

*Used Equation Coefficients:

Basemnt: 0, 0.1, 0

Outsid: 0, 0.3125, -40

Ktchn: 0, 0.3125, -40

I_PV: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)