Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object W3ISR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RFIn* RFiGate* DigiRpt* Temp* V1*
1780540477 449 Pkts 438 Pkts 41 Pkts 21 C 0 V
1780536877 305 Pkts 291 Pkts 30 Pkts 22 C 0 V
1780533277 361 Pkts 328 Pkts 16 Pkts 21 C 0 V
1780529677 388 Pkts 370 Pkts 18 Pkts 21 C 0 V
1780526077 349 Pkts 338 Pkts 19 Pkts 20 C 0 V
1780522477 265 Pkts 263 Pkts 22 Pkts 20 C 0 V
1780518877 329 Pkts 323 Pkts 33 Pkts 21 C 0 V
1780515276 304 Pkts 297 Pkts 36 Pkts 21 C 0 V
1780511676 318 Pkts 315 Pkts 65 Pkts 21 C 0 V
1780508135 306 Pkts 301 Pkts 68 Pkts 21 C 0 V
1780504476 239 Pkts 236 Pkts 37 Pkts 21 C 0 V
1780500876 270 Pkts 267 Pkts 28 Pkts 21 C 0 V
1780497276 316 Pkts 307 Pkts 60 Pkts 21 C 0 V
1780493676 330 Pkts 326 Pkts 49 Pkts 21 C 0 V
1780490076 305 Pkts 299 Pkts 27 Pkts 21 C 0 V
1780486476 283 Pkts 280 Pkts 26 Pkts 21 C 0 V
1780482876 250 Pkts 247 Pkts 18 Pkts 21 C 0 V
1780479276 249 Pkts 244 Pkts 27 Pkts 21 C 0 V
1780475676 195 Pkts 194 Pkts 18 Pkts 21 C 0 V
1780472076 204 Pkts 202 Pkts 10 Pkts 21 C 0 V
1780468476 201 Pkts 199 Pkts 9 Pkts 21 C 0 V
1780464876 184 Pkts 182 Pkts 13 Pkts 21 C 0 V
1780461276 193 Pkts 193 Pkts 20 Pkts 21 C 0 V
1780457676 230 Pkts 228 Pkts 21 Pkts 21 C 0 V
1780454076 269 Pkts 266 Pkts 26 Pkts 21 C 0 V
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
V1: 0, 0.1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)