Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object VU2RCY-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* WiFi* BaudRate*
1777584099 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
1777583791 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777583491 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777583191 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777582891 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777582591 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
1777582291 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777581991 0 Pkt 0 Pkt 0 Pkt 90 dB 1200 bps
1777581691 0 Pkt 0 Pkt 0 Pkt 90 dB 1200 bps
1777581391 0 Pkt 0 Pkt 0 Pkt 90 dB 1200 bps
1777581091 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777580792 0 Pkt 0 Pkt 0 Pkt 88 dB 1200 bps
1777580491 0 Pkt 0 Pkt 0 Pkt 90 dB 1200 bps
1777580191 0 Pkt 0 Pkt 0 Pkt 86 dB 1200 bps
1777579891 0 Pkt 0 Pkt 0 Pkt 85 dB 1200 bps
1777579591 0 Pkt 0 Pkt 0 Pkt 86 dB 1200 bps
1777579291 0 Pkt 0 Pkt 0 Pkt 88 dB 1200 bps
1777578991 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
1777578691 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
1777578391 0 Pkt 0 Pkt 0 Pkt 86 dB 1200 bps
1777578091 0 Pkt 0 Pkt 0 Pkt 89 dB 1200 bps
1777577791 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
1777577491 0 Pkt 0 Pkt 0 Pkt 90 dB 1200 bps
1777577191 0 Pkt 0 Pkt 0 Pkt 88 dB 1200 bps
1777576891 0 Pkt 0 Pkt 0 Pkt 87 dB 1200 bps
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)