VE6YMM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE6YMM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	RPTBAT*	Eff1h*	Dg1h*
1782058071	17 C	10.65 Volt	13.4 Volt	71 Pcnt	20 Pkt
1782057771	16.5 C	11.03 Volt	13.4 Volt	74 Pcnt	30 Pkt
1782057471	16 C	11.03 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782057171	17.5 C	10.65 Volt	13.4 Volt	75 Pcnt	30 Pkt
1782056871	18 C	10.95 Volt	13.4 Volt	76 Pcnt	20 Pkt
1782056571	16.5 C	10.8 Volt	13.4 Volt	76 Pcnt	30 Pkt
1782056271	16.5 C	10.88 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782055971	15.5 C	10.28 Volt	13.4 Volt	74 Pcnt	30 Pkt
1782055671	14.5 C	10.2 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782055371	14.5 C	10.2 Volt	13.4 Volt	74 Pcnt	30 Pkt
1782055074	14 C	10.95 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782055071	14 C	10.95 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782054771	13.5 C	11.03 Volt	13.4 Volt	76 Pcnt	30 Pkt
1782054471	13.5 C	11.18 Volt	13.4 Volt	73 Pcnt	20 Pkt
1782054171	13 C	10.8 Volt	13.4 Volt	73 Pcnt	30 Pkt
1782053871	13 C	10.43 Volt	13.4 Volt	73 Pcnt	20 Pkt
1782053571	13 C	11.18 Volt	13.4 Volt	73 Pcnt	30 Pkt
1782053271	13 C	10.28 Volt	13.4 Volt	75 Pcnt	20 Pkt
1782052971	13.5 C	10.8 Volt	13.4 Volt	75 Pcnt	30 Pkt
1782052671	13 C	10.8 Volt	13.4 Volt	76 Pcnt	20 Pkt
1782052371	12.5 C	10.65 Volt	13.4 Volt	77 Pcnt	30 Pkt
1782052071	11.5 C	10.5 Volt	13.4 Volt	74 Pcnt	30 Pkt
1782051771	12 C	10.5 Volt	13.4 Volt	73 Pcnt	30 Pkt
1782051471	12 C	10.58 Volt	13.4 Volt	75 Pcnt	30 Pkt
1782051171	12 C	10.73 Volt	13.4 Volt	73 Pcnt	30 Pkt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

RPTBAT: 0, 0.1, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)