E79XZA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E79XZA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1780535925	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780535625	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780535325	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780535025	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780534726	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780534425	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780534125	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780533825	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780533525	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780533225	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780532925	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780532625	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780532325	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780532025	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780531725	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780531425	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780531125	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780530825	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780530525	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780530225	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780529925	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780529625	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780529325	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780529025	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1780528725	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)