VE2RPW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE2RPW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754986081	13.8 Volt	530 Pkt	0 Pkt	93 Pcnt
1754986078	13.8 Volt	530 Pkt	0 Pkt	93 Pcnt
1754982480	13.88 Volt	440 Pkt	0 Pkt	92 Pcnt
1754978885	13.8 Volt	430 Pkt	0 Pkt	90 Pcnt
1754975281	13.8 Volt	390 Pkt	0 Pkt	92 Pcnt
1754975279	13.8 Volt	390 Pkt	0 Pkt	92 Pcnt
1754971689	13.8 Volt	410 Pkt	0 Pkt	93 Pcnt
1754964483	13.88 Volt	440 Pkt	0 Pkt	87 Pcnt
1754964479	13.88 Volt	440 Pkt	0 Pkt	87 Pcnt
1754960881	13.88 Volt	430 Pkt	0 Pkt	81 Pcnt
1754957281	13.88 Volt	490 Pkt	0 Pkt	76 Pcnt
1754953686	13.88 Volt	450 Pkt	0 Pkt	73 Pcnt
1754953679	13.88 Volt	450 Pkt	0 Pkt	73 Pcnt
1754942883	13.88 Volt	530 Pkt	0 Pkt	92 Pcnt
1754942879	13.88 Volt	530 Pkt	0 Pkt	92 Pcnt
1754935681	13.8 Volt	450 Pkt	0 Pkt	91 Pcnt
1754932085	13.8 Volt	540 Pkt	0 Pkt	89 Pcnt
1754932080	13.8 Volt	540 Pkt	0 Pkt	89 Pcnt
1754928546	13.8 Volt	730 Pkt	0 Pkt	91 Pcnt
1754924885	13.88 Volt	420 Pkt	0 Pkt	84 Pcnt
1754921282	13.8 Volt	610 Pkt	10 Pkt	85 Pcnt
1754921280	13.8 Volt	610 Pkt	10 Pkt	85 Pcnt
1754917682	13.8 Volt	490 Pkt	0 Pkt	85 Pcnt
1754914082	13.88 Volt	600 Pkt	0 Pkt	90 Pcnt
1754910482	13.88 Volt	580 Pkt	10 Pkt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)