YC0TBU-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	HDOP*	SAT*	TEMP*	HUMID*	PRESSURE*
1780616821	0 DOP	10 SAT	37 °C	44 %	1002 mBar
1780615925	0 DOP	11 SAT	37 °C	44 %	1001 mBar
1780615024	0 DOP	10 SAT	37 °C	45 %	1001 mBar
1780614120	0 DOP	10 SAT	37 °C	45 %	1001 mBar
1780613221	0 DOP	9 SAT	37 °C	45 %	1001 mBar
1780612321	1 DOP	8 SAT	37 °C	44 %	1001 mBar
1780611421	0 DOP	9 SAT	37 °C	45 %	1001 mBar
1780610523	0 DOP	9 SAT	37 °C	45 %	1001 mBar
1780609621	1 DOP	9 SAT	37 °C	45 %	1001 mBar
1780608723	0 DOP	9 SAT	37 °C	45 %	1001 mBar
1780607824	1 DOP	9 SAT	37 °C	45 %	1001 mBar
1780606926	1 DOP	8 SAT	37 °C	45 %	1001 mBar
1780606059	1 DOP	9 SAT	37 °C	45 %	1001 mBar
1780605140	1 DOP	8 SAT	37 °C	46 %	1001 mBar
1780604225	1 DOP	8 SAT	37 °C	46 %	1001 mBar
1780603348	0 DOP	9 SAT	37 °C	46 %	1001 mBar
1780602471	1 DOP	8 SAT	37 °C	46 %	1001 mBar
1780601558	1 DOP	8 SAT	37 °C	46 %	1001 mBar
1780600657	2 DOP	8 SAT	37 °C	47 %	1001 mBar
1780599761	1 DOP	10 SAT	37 °C	48 %	1001 mBar
1780598826	1 DOP	7 SAT	37 °C	48 %	1001 mBar
1780598462	0 DOP	8 SAT	37 °C	48 %	1001 mBar
1780597588	1 DOP	6 SAT	37 °C	48 %	1001 mBar
1780596661	0 DOP	7 SAT	37 °C	48 %	1001 mBar
1780595880	1 DOP	8 SAT	37 °C	47 %	1001 mBar

*Used Equation Coefficients:

HDOP: 0, 1, 0

SAT: 0, 1, 0

TEMP: 0, 1, 0

HUMID: 0, 1, 0

PRESSURE: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)