YC0TBU-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	SAT NUM*	HDOP*	TEMP*	HUMIDITY*	PRESSURE*
1761578826	9 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578761	8 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578697	8 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578632	9 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578567	8 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578503	8 SAT	1 DOP	35 C	44 %	1008 mBAR
1761578438	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761578373	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761578309	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761578244	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761578115	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761578055	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577921	7 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577856	7 SAT	2 DOP	35 C	43 %	1008 mBAR
1761577727	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577670	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577598	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577533	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577468	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577404	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577339	9 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577274	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577210	8 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577145	6 SAT	1 DOP	35 C	43 %	1008 mBAR
1761577077	8 SAT	1 DOP	35 C	43 %	1008 mBAR

*Used Equation Coefficients:

SAT NUM: 0, 1, 0

HDOP: 0, 1, 0

TEMP: 0, 1, 0

HUMIDITY: 0, 1, 0

PRESSURE: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)