9M2OCX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2OCX-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1772653781	0 Pkt	0 Pkt	0 Pkt	-52 dBm	0.06 V
1772653602	30 Pkt	19 Pkt	11 Pkt	-52 dBm	0.06 V
1772651776	36 Pkt	18 Pkt	14 Pkt	-50 dBm	0.06 V
1772649949	39 Pkt	17 Pkt	15 Pkt	-50 dBm	0.06 V
1772648123	34 Pkt	17 Pkt	14 Pkt	-51 dBm	0.06 V
1772646297	38 Pkt	8 Pkt	7 Pkt	-51 dBm	0.06 V
1772644470	3 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V
1772643877	41 Pkt	8 Pkt	4 Pkt	-49 dBm	0.06 V
1772642051	2 Pkt	0 Pkt	0 Pkt	-53 dBm	0.06 V
1772641581	56 Pkt	13 Pkt	1 Pkt	-51 dBm	0.06 V
1772639754	45 Pkt	11 Pkt	7 Pkt	-50 dBm	0.06 V
1772637927	38 Pkt	6 Pkt	7 Pkt	-51 dBm	0.06 V
1772636101	2 Pkt	0 Pkt	0 Pkt	-51 dBm	0.06 V
1772634182	33 Pkt	21 Pkt	8 Pkt	-54 dBm	0.06 V
1772632355	12 Pkt	21 Pkt	6 Pkt	-52 dBm	0.04 V
1772630529	23 Pkt	17 Pkt	9 Pkt	-53 dBm	0.06 V
1772628703	26 Pkt	15 Pkt	9 Pkt	-52 dBm	0.06 V
1772626877	38 Pkt	11 Pkt	1 Pkt	-51 dBm	0.06 V
1772625051	2 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V
1772624005	87 Pkt	21 Pkt	25 Pkt	-53 dBm	0.06 V
1772622177	70 Pkt	15 Pkt	9 Pkt	-51 dBm	0.06 V
1772620350	42 Pkt	16 Pkt	7 Pkt	-51 dBm	0.06 V
1772618524	33 Pkt	17 Pkt	7 Pkt	-50 dBm	0.06 V
1772616698	51 Pkt	9 Pkt	5 Pkt	-50 dBm	0.06 V
1772614882	3 Pkt	0 Pkt	0 Pkt	-50 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)