YB1CAS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1CAS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1772913709	37 Pkt	1 Pkt	0 Pkt	-39 dBm	5.68 V
1772912777	41 Pkt	1 Pkt	0 Pkt	-41 dBm	5.68 V
1772911848	40 Pkt	2 Pkt	0 Pkt	-41 dBm	5.68 V
1772910919	34 Pkt	1 Pkt	0 Pkt	-41 dBm	5.68 V
1772909990	44 Pkt	2 Pkt	0 Pkt	-38 dBm	5.68 V
1772909059	33 Pkt	0 Pkt	0 Pkt	-40 dBm	5.68 V
1772908133	44 Pkt	1 Pkt	0 Pkt	-39 dBm	5.68 V
1772907203	31 Pkt	2 Pkt	0 Pkt	-39 dBm	5.68 V
1772906274	39 Pkt	1 Pkt	0 Pkt	-40 dBm	5.68 V
1772905344	38 Pkt	1 Pkt	0 Pkt	-40 dBm	5.68 V
1772904417	40 Pkt	1 Pkt	0 Pkt	-40 dBm	5.68 V
1772903486	26 Pkt	0 Pkt	1 Pkt	-42 dBm	5.68 V
1772902699	42 Pkt	1 Pkt	0 Pkt	-41 dBm	5.68 V
1772901765	34 Pkt	2 Pkt	0 Pkt	-41 dBm	5.68 V
1772900838	36 Pkt	1 Pkt	0 Pkt	-41 dBm	5.68 V
1772899911	37 Pkt	1 Pkt	0 Pkt	-39 dBm	5.68 V
1772898982	34 Pkt	1 Pkt	0 Pkt	-41 dBm	5.68 V
1772897125	29 Pkt	1 Pkt	0 Pkt	-36 dBm	5.68 V
1772896199	44 Pkt	0 Pkt	0 Pkt	-36 dBm	5.68 V
1772895268	30 Pkt	2 Pkt	0 Pkt	-46 dBm	5.68 V
1772894340	34 Pkt	1 Pkt	0 Pkt	-37 dBm	5.68 V
1772893414	39 Pkt	1 Pkt	0 Pkt	-39 dBm	5.68 V
1772892488	40 Pkt	2 Pkt	0 Pkt	-38 dBm	5.68 V
1772891560	44 Pkt	2 Pkt	0 Pkt	-35 dBm	5.7 V
1772890655	33 Pkt	1 Pkt	0 Pkt	-40 dBm	5.7 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)