CT7BPR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CT7BPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	U*	Rx1h*	Dg1h*	Eff1h*
1772778835	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772777935	14.1 Volt	80 Pkt	40 Pkt	100 Pcnt
1772777035	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772776135	14.1 Volt	80 Pkt	40 Pkt	100 Pcnt
1772775236	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772774335	14.1 Volt	80 Pkt	40 Pkt	100 Pcnt
1772773435	14.1 Volt	90 Pkt	30 Pkt	100 Pcnt
1772772535	14.1 Volt	90 Pkt	40 Pkt	100 Pcnt
1772771636	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772770735	14.1 Volt	90 Pkt	40 Pkt	100 Pcnt
1772769835	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772768935	14.1 Volt	80 Pkt	40 Pkt	100 Pcnt
1772768035	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772767135	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772766235	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772765335	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772764435	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772763535	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772762635	14.1 Volt	80 Pkt	30 Pkt	100 Pcnt
1772761735	14.1 Volt	90 Pkt	30 Pkt	100 Pcnt
1772760835	14.1 Volt	90 Pkt	30 Pkt	100 Pcnt
1772759935	14.1 Volt	90 Pkt	30 Pkt	100 Pcnt
1772759035	14.1 Volt	90 Pkt	30 Pkt	97 Pcnt
1772757235	14.1 Volt	80 Pkt	30 Pkt	97 Pcnt
1772756336	14.1 Volt	80 Pkt	30 Pkt	97 Pcnt

*Used Equation Coefficients:

U: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)