DJ7AL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ7AL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1781960633	996.1 hPa	29.6 C deg	40.1 %	1020.1 hPa	0 C deg
1781960570	996.1 hPa	29.6 C deg	40.1 %	1020.1 hPa	0 C deg
1781959992	996.4 hPa	29.6 C deg	40.2 %	1020.4 hPa	0 C deg
1781959797	996.5 hPa	29.5 C deg	40.3 %	1020.5 hPa	0 C deg
1781959668	996.5 hPa	29.5 C deg	40.4 %	1020.5 hPa	0 C deg
1781959598	996.5 hPa	29.4 C deg	40.4 %	1020.5 hPa	0 C deg
1781959398	996.5 hPa	29.3 C deg	40.8 %	1020.5 hPa	0 C deg
1781959307	996.5 hPa	29.2 C deg	41.1 %	1020.6 hPa	0 C deg
1781959255	996.5 hPa	29.2 C deg	41.1 %	1020.6 hPa	0 C deg
1781959198	996.6 hPa	29.2 C deg	41.2 %	1020.6 hPa	0 C deg
1781959085	996.6 hPa	29 C deg	41.7 %	1020.6 hPa	0 C deg
1781958950	996.6 hPa	28.8 C deg	42.3 %	1020.6 hPa	0 C deg
1781958683	996.6 hPa	28.5 C deg	43.8 %	1020.7 hPa	0 C deg
1781958516	996.6 hPa	27.9 C deg	43.4 %	1020.8 hPa	0 C deg
1781958481	996.6 hPa	27.6 C deg	42.9 %	1020.8 hPa	0 C deg
1781958302	997.2 hPa	26.8 C deg	38.8 %	1021.4 hPa	0 C deg
1781952906	996.5 hPa	28.1 C deg	43.8 %	1020.6 hPa	0 C deg
1781952440	996.4 hPa	30.8 C deg	39 %	1020.3 hPa	0 C deg
1781951828	996.2 hPa	28.6 C deg	43.2 %	1020.3 hPa	0 C deg
1781951702	996.2 hPa	28.2 C deg	43.8 %	1020.3 hPa	0 C deg
1781951484	996.2 hPa	30.1 C deg	39.7 %	1020.1 hPa	0 C deg
1781951080	996.2 hPa	29.7 C deg	40 %	1020.2 hPa	0 C deg
1781951061	996.2 hPa	29.7 C deg	40 %	1020.2 hPa	0 C deg
1781950533	996.3 hPa	28.3 C deg	43.2 %	1020.3 hPa	0 C deg
1781948895	996.2 hPa	29.6 C deg	40.2 %	1022.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)