VK7ZRO-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK7ZRO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1750669441	0.03 Rx Erlang	0 Tx Erlang	30 count/10m	1 count/10m	0 count/10m
1750667042	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	1 count/10m	0 count/10m
1750665842	0.01 Rx Erlang	0 Tx Erlang	13 count/10m	1 count/10m	0 count/10m
1750664642	0.02 Rx Erlang	0 Tx Erlang	20 count/10m	0 count/10m	0 count/10m
1750663442	0.03 Rx Erlang	0 Tx Erlang	35 count/10m	4 count/10m	0 count/10m
1750662241	0.05 Rx Erlang	0 Tx Erlang	39 count/10m	3 count/10m	0 count/10m
1750659842	0.05 Rx Erlang	0 Tx Erlang	62 count/10m	2 count/10m	0 count/10m
1750658642	0.02 Rx Erlang	0 Tx Erlang	15 count/10m	8 count/10m	0 count/10m
1750657442	0.02 Rx Erlang	0 Tx Erlang	11 count/10m	5 count/10m	0 count/10m
1750656241	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	4 count/10m	0 count/10m
1750653842	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	3 count/10m	0 count/10m
1750652642	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	1 count/10m	0 count/10m
1750651442	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	3 count/10m	0 count/10m
1750650242	0.01 Rx Erlang	0 Tx Erlang	11 count/10m	4 count/10m	0 count/10m
1750649042	0.02 Rx Erlang	0 Tx Erlang	15 count/10m	7 count/10m	0 count/10m
1750647842	0.02 Rx Erlang	0 Tx Erlang	20 count/10m	4 count/10m	0 count/10m
1750646642	0.03 Rx Erlang	0 Tx Erlang	33 count/10m	2 count/10m	0 count/10m
1750645441	0.02 Rx Erlang	0 Tx Erlang	24 count/10m	2 count/10m	0 count/10m
1750644241	0.02 Rx Erlang	0 Tx Erlang	23 count/10m	5 count/10m	0 count/10m
1750643042	0.02 Rx Erlang	0 Tx Erlang	27 count/10m	3 count/10m	0 count/10m
1750641842	0.03 Rx Erlang	0 Tx Erlang	35 count/10m	1 count/10m	0 count/10m
1750640642	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	5 count/10m	0 count/10m
1750639442	0.01 Rx Erlang	0 Tx Erlang	9 count/10m	1 count/10m	0 count/10m
1750638242	0.03 Rx Erlang	0 Tx Erlang	35 count/10m	3 count/10m	0 count/10m
1750637042	0.01 Rx Erlang	0 Tx Erlang	14 count/10m	0 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)