KK7LIX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK7LIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1781860299	12.3 Volt	60 Pkt	100 Pcnt	47.3 F
1781859999	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781859699	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781859399	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781859099	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781858799	12.23 Volt	60 Pkt	100 Pcnt	47.3 F
1781858499	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781858199	12.3 Volt	60 Pkt	100 Pcnt	47.3 F
1781857899	12.3 Volt	60 Pkt	100 Pcnt	47.3 F
1781857599	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781857299	12.3 Volt	60 Pkt	100 Pcnt	48.2 F
1781856999	12.23 Volt	60 Pkt	98 Pcnt	48.2 F
1781856699	12.3 Volt	60 Pkt	98 Pcnt	48.2 F
1781856399	12.3 Volt	60 Pkt	98 Pcnt	49.1 F
1781856099	12.3 Volt	60 Pkt	98 Pcnt	49.1 F
1781855799	12.23 Volt	60 Pkt	98 Pcnt	49.1 F
1781855499	12.3 Volt	60 Pkt	98 Pcnt	49.1 F
1781855199	12.3 Volt	60 Pkt	98 Pcnt	50 F
1781854899	12.3 Volt	60 Pkt	98 Pcnt	50 F
1781854599	12.3 Volt	60 Pkt	98 Pcnt	50 F
1781854299	12.3 Volt	60 Pkt	98 Pcnt	50 F
1781853999	12.3 Volt	60 Pkt	98 Pcnt	50.9 F
1781853699	12.3 Volt	60 Pkt	100 Pcnt	51.8 F
1781853399	12.3 Volt	60 Pkt	100 Pcnt	51.8 F
1781853099	12.3 Volt	60 Pkt	100 Pcnt	51.8 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)