N5BDJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5BDJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1757544005	20 Pkts	19 Pkts	15 Pkts	30 C
1757540405	33 Pkts	33 Pkts	21 Pkts	30 C
1757536805	27 Pkts	26 Pkts	17 Pkts	30 C
1757533205	11 Pkts	11 Pkts	11 Pkts	29 C
1757529605	8 Pkts	8 Pkts	8 Pkts	30 C
1757526005	8 Pkts	8 Pkts	8 Pkts	30 C
1757522405	15 Pkts	15 Pkts	15 Pkts	30 C
1757518805	30 Pkts	28 Pkts	24 Pkts	29 C
1757515205	87 Pkts	82 Pkts	29 Pkts	29 C
1757511605	150 Pkts	138 Pkts	40 Pkts	29 C
1757508005	81 Pkts	70 Pkts	30 Pkts	29 C
1757504405	165 Pkts	150 Pkts	64 Pkts	29 C
1757500805	73 Pkts	61 Pkts	21 Pkts	29 C
1757497205	38 Pkts	28 Pkts	19 Pkts	29 C
1757493605	36 Pkts	27 Pkts	11 Pkts	29 C
1757490006	85 Pkts	61 Pkts	22 Pkts	29 C
1757483723	18 Pkts	14 Pkts	9 Pkts	29 C
1757480123	22 Pkts	17 Pkts	13 Pkts	29 C
1757476523	12 Pkts	11 Pkts	9 Pkts	29 C
1757472923	8 Pkts	8 Pkts	7 Pkts	29 C
1757469323	23 Pkts	22 Pkts	17 Pkts	30 C
1757465723	106 Pkts	102 Pkts	91 Pkts	30 C
1757462123	23 Pkts	22 Pkts	19 Pkts	30 C
1757458523	45 Pkts	42 Pkts	33 Pkts	30 C
1757454923	37 Pkts	33 Pkts	22 Pkts	30 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)