CALGRY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CALGRY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg10m*	Shack*	VDC*	VAC*
1785316226	180 Pkt	12 Pkt	29 C	13.3 Volts	120.65 Volts
1785315567	200 Pkt	8 Pkt	29 C	13.3 Volts	120.65 Volts
1785314907	200 Pkt	14 Pkt	29 C	13.3 Volts	120.65 Volts
1785314247	190 Pkt	8 Pkt	29 C	13.3 Volts	120.65 Volts
1785313587	190 Pkt	10 Pkt	29 C	13.3 Volts	119.7 Volts
1785312927	190 Pkt	11 Pkt	29 C	13.3 Volts	119.7 Volts
1785312267	170 Pkt	11 Pkt	29 C	13.3 Volts	119.7 Volts
1785311607	160 Pkt	13 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785310947	160 Pkt	8 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785310287	160 Pkt	11 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785309627	160 Pkt	7 Pkt	29.5 C	13.3 Volts	121.6 Volts
1785308967	170 Pkt	13 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785308307	170 Pkt	9 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785307647	160 Pkt	9 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785306987	160 Pkt	9 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785306327	160 Pkt	9 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785305667	160 Pkt	7 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785305007	150 Pkt	10 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785304347	140 Pkt	7 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785303687	140 Pkt	7 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785303027	160 Pkt	8 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785302367	170 Pkt	5 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785301707	170 Pkt	9 Pkt	29.5 C	13.3 Volts	120.65 Volts
1785301047	170 Pkt	8 Pkt	29.5 C	13.3 Volts	119.7 Volts
1785300387	170 Pkt	13 Pkt	29.5 C	13.3 Volts	119.7 Volts

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Shack: 0, 0.5, -64

VDC: 0, 0.1, 0

VAC: 0, 0.95, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)