HS6PNA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PNA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1765559554	20 ug/m3	30 ug/m3	33 ug/m3	-4 dBm	13.88 V
1765558632	17 ug/m3	29 ug/m3	30 ug/m3	-2 dBm	14.17 V
1765557710	19 ug/m3	29 ug/m3	32 ug/m3	-2 dBm	14.09 V
1765555866	18 ug/m3	29 ug/m3	31 ug/m3	-3 dBm	13.92 V
1765554022	19 ug/m3	28 ug/m3	30 ug/m3	-3 dBm	13.88 V
1765548892	25 ug/m3	41 ug/m3	48 ug/m3	-2 dBm	13.95 V
1765548279	147 ug/m3	294 ug/m3	318 ug/m3	-3 dBm	13.9 V
1765547357	19 ug/m3	29 ug/m3	31 ug/m3	-7 dBm	14.17 V
1765547003	19 ug/m3	29 ug/m3	30 ug/m3	-3 dBm	13.9 V
1765546081	19 ug/m3	27 ug/m3	28 ug/m3	-2 dBm	13.9 V
1765545159	19 ug/m3	29 ug/m3	31 ug/m3	-3 dBm	13.9 V
1765544237	23 ug/m3	36 ug/m3	43 ug/m3	-15 dBm	13.72 V
1765543315	21 ug/m3	31 ug/m3	32 ug/m3	-2 dBm	13.82 V
1765542393	147 ug/m3	274 ug/m3	287 ug/m3	-2 dBm	13.92 V
1765541618	17 ug/m3	26 ug/m3	28 ug/m3	-5 dBm	13.62 V
1765540696	19 ug/m3	29 ug/m3	30 ug/m3	-5 dBm	14.05 V
1765539775	91 ug/m3	169 ug/m3	179 ug/m3	-3 dBm	13.6 V
1765538852	22 ug/m3	35 ug/m3	42 ug/m3	-2 dBm	13.86 V
1765537930	22 ug/m3	34 ug/m3	38 ug/m3	-3 dBm	13.84 V
1765537008	20 ug/m3	31 ug/m3	33 ug/m3	-4 dBm	13.66 V
1765536086	17 ug/m3	27 ug/m3	27 ug/m3	-12 dBm	13.97 V
1765535164	15 ug/m3	23 ug/m3	25 ug/m3	-2 dBm	14.19 V
1765534241	17 ug/m3	24 ug/m3	24 ug/m3	-2 dBm	13.99 V
1765533319	14 ug/m3	23 ug/m3	23 ug/m3	-3 dBm	13.88 V
1765532398	23 ug/m3	36 ug/m3	41 ug/m3	-9 dBm	13.66 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)