IZ4VVL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4VVL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1777326811	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777326511	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777326211	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777325911	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777325611	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777325311	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777325011	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777324711	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777324411	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777324111	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777323811	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777323511	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777323211	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777322911	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777322611	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777322311	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777322011	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777321711	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777321411	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777321111	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777320811	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777320511	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777320211	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777319911	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt
1777319611	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	100 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)