HG8PBJ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HG8PBJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Uaux_V*	Ubat_V*	Uproc_V*	Tint_C*
1781390527	14 Volt	13.3 Volt	4.9 Volt	21.5 Cels
1781389567	14 Volt	13.3 Volt	4.9 Volt	21.5 Cels
1781388760	14 Volt	13.3 Volt	4.9 Volt	22 Cels
1781387798	14 Volt	13.3 Volt	4.9 Volt	22 Cels
1781386994	14 Volt	13.3 Volt	4.9 Volt	22.5 Cels
1781386035	14 Volt	13.3 Volt	4.9 Volt	22.5 Cels
1781385224	14 Volt	13.3 Volt	4.9 Volt	22.5 Cels
1781384267	14 Volt	13.3 Volt	4.9 Volt	22.5 Cels
1781383460	14 Volt	13.3 Volt	4.9 Volt	23 Cels
1781382499	14 Volt	13.3 Volt	4.9 Volt	23.5 Cels
1781380733	14 Volt	13.3 Volt	4.9 Volt	24.5 Cels
1781378968	14 Volt	13.3 Volt	4.9 Volt	26 Cels
1781377198	14 Volt	13.3 Volt	4.9 Volt	28.5 Cels
1781376394	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781375433	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781374619	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781373665	14 Volt	13.3 Volt	4.9 Volt	29.5 Cels
1781372855	14 Volt	13.3 Volt	4.9 Volt	29.5 Cels
1781371080	14 Volt	13.3 Volt	4.9 Volt	29.5 Cels
1781370129	14 Volt	13.3 Volt	4.9 Volt	29.5 Cels
1781369314	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781368359	14 Volt	13.3 Volt	4.9 Volt	29.5 Cels
1781367553	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781366591	14 Volt	13.3 Volt	4.9 Volt	29 Cels
1781364021	14 Volt	13.3 Volt	4.9 Volt	29 Cels

*Used Equation Coefficients:

Uaux_V: 0, 1, 0

Ubat_V: 0, 1, 0

Upwr_V: 0, 1, 0

Uproc_V: 0, 1, 0

Tint_C: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)