ER-VU2PUM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-VU2PUM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Value1*	Value2*	Value3*	Value4*
1776822977	1 RX Erlang	0 TX Erlang	1 RXcount/10m	0 TXcount/10m
1776822377	0.48 RX Erlang	0.36 TX Erlang	119 RXcount/10m	13 TXcount/10m
1776821777	0.62 RX Erlang	0.2 TX Erlang	183 RXcount/10m	8 TXcount/10m
1776821177	0.53 RX Erlang	0.07 TX Erlang	214 RXcount/10m	2 TXcount/10m
1776820577	0.16 RX Erlang	0.04 TX Erlang	67 RXcount/10m	3 TXcount/10m
1776819977	0.1 RX Erlang	0.01 TX Erlang	59 RXcount/10m	1 TXcount/10m
1776819377	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1776786931	1 RX Erlang	0 TX Erlang	1 RXcount/10m	0 TXcount/10m
1776786331	0.58 RX Erlang	0.26 TX Erlang	161 RXcount/10m	7 TXcount/10m
1776785731	0.41 RX Erlang	0.15 TX Erlang	117 RXcount/10m	4 TXcount/10m
1776785131	0 RX Erlang	0 TX Erlang	2 RXcount/10m	0 TXcount/10m
1776736238	0.19 RX Erlang	0.21 TX Erlang	71 RXcount/10m	10 TXcount/10m
1776735092	0.66 RX Erlang	0.16 TX Erlang	202 RXcount/10m	7 TXcount/10m
1776734492	0.62 RX Erlang	0.01 TX Erlang	259 RXcount/10m	1 TXcount/10m
1776650309	0.03 RX Erlang	0.01 TX Erlang	21 RXcount/10m	1 TXcount/10m
1776649301	0.42 RX Erlang	0.31 TX Erlang	93 RXcount/10m	15 TXcount/10m
1776648701	0.58 RX Erlang	0.2 TX Erlang	182 RXcount/10m	6 TXcount/10m
1776648101	0.45 RX Erlang	0.01 TX Erlang	196 RXcount/10m	1 TXcount/10m
1776614201	0.16 RX Erlang	0 TX Erlang	59 RXcount/10m	0 TXcount/10m
1776613601	0.52 RX Erlang	0.32 TX Erlang	146 RXcount/10m	10 TXcount/10m
1776613001	0.32 RX Erlang	0.21 TX Erlang	93 RXcount/10m	6 TXcount/10m
1776612401	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1776563488	0.49 RX Erlang	0.25 TX Erlang	155 RXcount/10m	13 TXcount/10m
1776562888	0.6 RX Erlang	0.28 TX Erlang	144 RXcount/10m	9 TXcount/10m
1776562288	0.66 RX Erlang	0.03 TX Erlang	238 RXcount/10m	2 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)