OK0BAD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0BAD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	T_ext*
1773043111	5.18 Volt	440 Pkt	1160 Pkt	4 Pcnt	-23 None
1773042208	6.83 Volt	670 Pkt	1160 Pkt	4 Pcnt	-23 None
1773041308	7.05 Volt	640 Pkt	1170 Pkt	4 Pcnt	-23 None
1773040408	6.98 Volt	570 Pkt	1160 Pkt	4 Pcnt	-23 None
1773039509	5.93 Volt	490 Pkt	1160 Pkt	4 Pcnt	-23 None
1773038609	6.3 Volt	580 Pkt	1160 Pkt	4 Pcnt	-23 None
1773037708	7.2 Volt	630 Pkt	1160 Pkt	4 Pcnt	-23 None
1773036809	6.45 Volt	620 Pkt	1160 Pkt	4 Pcnt	-23 None
1773035909	5.85 Volt	620 Pkt	1160 Pkt	4 Pcnt	-23 None
1773035009	5.78 Volt	540 Pkt	1160 Pkt	4 Pcnt	-23 None
1773034108	5.63 Volt	500 Pkt	1160 Pkt	4 Pcnt	-23 None
1773033208	5.25 Volt	510 Pkt	1170 Pkt	4 Pcnt	-23 None
1773032311	5.63 Volt	460 Pkt	1170 Pkt	4 Pcnt	-23 None
1773031409	5.1 Volt	480 Pkt	1160 Pkt	4 Pcnt	-23 None
1773030509	5.03 Volt	450 Pkt	1160 Pkt	4 Pcnt	-23 None
1773029608	4.73 Volt	460 Pkt	1160 Pkt	4 Pcnt	-23 None
1773028709	4.58 Volt	410 Pkt	1160 Pkt	4 Pcnt	-23 None
1773027809	4.95 Volt	460 Pkt	1160 Pkt	4 Pcnt	-23 None
1773026909	4.58 Volt	410 Pkt	1160 Pkt	4 Pcnt	-23 None
1773026008	5.03 Volt	460 Pkt	1160 Pkt	4 Pcnt	-23 None
1773025108	4.8 Volt	470 Pkt	1160 Pkt	4 Pcnt	-23 None
1773024209	4.88 Volt	410 Pkt	1160 Pkt	4 Pcnt	-23 None
1773023309	4.5 Volt	430 Pkt	1170 Pkt	4 Pcnt	-23 None
1773022408	5.33 Volt	480 Pkt	1170 Pkt	4 Pcnt	-23 None
1773021508	4.8 Volt	390 Pkt	1170 Pkt	4 Pcnt	-27.5 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T_ext: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)