W1DMR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1DMR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1781390014	14.25 Volt	990 Pkt	69 Pcnt	132 Pkt
1781389714	14.25 Volt	1020 Pkt	70 Pcnt	151 Pkt
1781389415	14.25 Volt	1030 Pkt	70 Pcnt	167 Pkt
1781389115	14.25 Volt	1020 Pkt	70 Pcnt	194 Pkt
1781388814	14.25 Volt	980 Pkt	69 Pcnt	159 Pkt
1781388514	14.25 Volt	970 Pkt	69 Pcnt	133 Pkt
1781388215	14.25 Volt	960 Pkt	68 Pcnt	125 Pkt
1781387914	14.25 Volt	940 Pkt	69 Pcnt	170 Pkt
1781387614	14.25 Volt	940 Pkt	69 Pcnt	167 Pkt
1781387314	14.25 Volt	950 Pkt	69 Pcnt	126 Pkt
1781387015	14.25 Volt	930 Pkt	69 Pcnt	131 Pkt
1781386714	14.25 Volt	920 Pkt	69 Pcnt	150 Pkt
1781386415	14.25 Volt	890 Pkt	68 Pcnt	154 Pkt
1781386115	14.25 Volt	880 Pkt	68 Pcnt	145 Pkt
1781385814	14.25 Volt	860 Pkt	68 Pcnt	124 Pkt
1781385514	14.25 Volt	850 Pkt	68 Pcnt	153 Pkt
1781385215	14.25 Volt	850 Pkt	68 Pcnt	138 Pkt
1781384915	14.25 Volt	870 Pkt	69 Pcnt	115 Pkt
1781384615	14.25 Volt	860 Pkt	69 Pcnt	109 Pkt
1781384315	14.25 Volt	860 Pkt	68 Pcnt	171 Pkt
1781384015	14.25 Volt	880 Pkt	69 Pcnt	150 Pkt
1781383715	14.25 Volt	870 Pkt	68 Pcnt	97 Pkt
1781383415	14.25 Volt	890 Pkt	69 Pcnt	102 Pkt
1781383115	14.25 Volt	920 Pkt	70 Pcnt	119 Pkt
1781382815	14.25 Volt	920 Pkt	70 Pcnt	121 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)