BX4AEF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX4AEF-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1753618815	36.9 C	36 p	72 p	2183 p
1753616414	36.8 C	16 p	47 p	2172 p
1753615215	36.9 C	17 p	47 p	2181 p
1753614015	36.7 C	14 p	70 p	2273 p
1753611615	36.8 C	40 p	171 p	2298 p
1753610415	36 C	63 p	171 p	2309 p
1753609214	35.1 C	68 p	125 p	2294 p
1753608015	35.6 C	40 p	76 p	2247 p
1753606815	33.4 C	17 p	68 p	2225 p
1753605615	33.2 C	19 p	82 p	2226 p
1753604414	30.5 C	32 p	137 p	2231 p
1753603215	25.2 C	31 p	196 p	2221 p
1753600815	20.6 C	91 p	189 p	2152 p
1753599614	22 C	44 p	134 p	2096 p
1753598419	22.9 C	53 p	124 p	2071 p
1753597215	21.6 C	36 p	95 p	2039 p
1753596015	24.1 C	35 p	83 p	2021 p
1753594814	21.8 C	24 p	74 p	2014 p
1753593615	21.8 C	24 p	91 p	2010 p
1753592414	23 C	26 p	91 p	2004 p
1753591214	23.4 C	41 p	89 p	2003 p
1753590015	33.2 C	24 p	123 p	1983 p
1753588835	37.6 C	24 p	144 p	2017 p
1753587615	37.1 C	75 p	136 p	2056 p
1753586414	37.9 C	45 p	97 p	2004 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)