DG0OPK-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG0OPK-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1773050422	966 hPa	12.1 C deg	57.2 %	819 -	0 C deg
1773048605	966.2 hPa	10.8 C deg	62.7 %	441 -	0 C deg
1773046804	966.4 hPa	9.9 C deg	65.1 %	404 -	0 C deg
1773044974	966.3 hPa	8.1 C deg	73.5 %	219 -	0 C deg
1773041350	966.5 hPa	4.8 C deg	82.2 %	88 -	0 C deg
1773037715	966.2 hPa	2.6 C deg	84 %	87 -	0 C deg
1773035893	966.2 hPa	2.2 C deg	84.3 %	94 -	0 C deg
1773026820	966.6 hPa	2.8 C deg	82.3 %	112 -	0 C deg
1773025014	966.7 hPa	2.9 C deg	82 %	112 -	0 C deg
1773023181	967 hPa	3.2 C deg	81 %	128 -	0 C deg
1773021366	967.3 hPa	3.2 C deg	80.5 %	134 -	0 C deg
1773019556	967.5 hPa	3.3 C deg	80.7 %	131 -	0 C deg
1773017736	967.6 hPa	3.8 C deg	79 %	163 -	0 C deg
1773014103	967.6 hPa	4.1 C deg	78.9 %	171 -	0 C deg
1773008658	967.8 hPa	4.8 C deg	77.5 %	174 -	0 C deg
1773006842	968 hPa	4.7 C deg	78.1 %	142 -	0 C deg
1773003243	968.3 hPa	5.2 C deg	77.7 %	125 -	0 C deg
1773001394	968.4 hPa	5.9 C deg	76 %	142 -	0 C deg
1772999579	968.2 hPa	6.5 C deg	74 %	142 -	0 C deg
1772994142	968.4 hPa	8.6 C deg	68.4 %	175 -	0 C deg
1772988691	967.8 hPa	14.4 C deg	54.4 %	388 -	0 C deg
1772985055	967.6 hPa	16.5 C deg	45.2 %	1614 -	0 C deg
1772983240	967.7 hPa	16.7 C deg	44.9 %	2562 -	0 C deg
1772979614	968 hPa	17.1 C deg	44 %	2622 -	0 C deg
1772975976	968.3 hPa	17.1 C deg	45.4 %	2401 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)