9W2JEK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2JEK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1773059551	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	10 count/10m
1773058351	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	4 count/10m
1773057151	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	4 count/10m
1773055951	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1773054751	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	5 count/10m
1773053551	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	4 count/10m
1773052351	0.04 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	5 count/10m
1773051151	0.04 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	8 count/10m
1773049951	0.03 Rx Erlang	0.02 Tx Erlang	16 count/10m	0 count/10m	8 count/10m
1773048751	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	6 count/10m
1773047551	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	6 count/10m
1773046351	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	4 count/10m
1773045151	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	4 count/10m
1773043951	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	3 count/10m
1773042751	0.01 Rx Erlang	0 Tx Erlang	5 count/10m	0 count/10m	3 count/10m
1773041551	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	10 count/10m
1773040351	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	9 count/10m
1773039151	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	9 count/10m
1773037951	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	8 count/10m
1773036751	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	4 count/10m
1773035551	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	3 count/10m
1773034351	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	5 count/10m
1773031951	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	9 count/10m
1773030751	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	7 count/10m
1773029551	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	11 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)