DL2JA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2JA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1757607411	957 hPa	21.9 C deg	1019.2 hPa	0 C deg
1757605611	956.7 hPa	21.9 C deg	1018.9 hPa	0 C deg
1757603810	956.5 hPa	21.8 C deg	1018.7 hPa	0 C deg
1757602010	956.4 hPa	21.8 C deg	1018.6 hPa	0 C deg
1757600210	956.2 hPa	21.8 C deg	1018.4 hPa	0 C deg
1757598410	956 hPa	21.8 C deg	1018.2 hPa	0 C deg
1757596610	955.9 hPa	21.7 C deg	1018.1 hPa	0 C deg
1757594808	955.9 hPa	21.6 C deg	1018.1 hPa	0 C deg
1757593008	955.8 hPa	21.6 C deg	1018 hPa	0 C deg
1757591208	955.7 hPa	21.5 C deg	1018 hPa	0 C deg
1757589407	955.9 hPa	21.4 C deg	1018.1 hPa	0 C deg
1757587607	955.8 hPa	21.4 C deg	1018.1 hPa	0 C deg
1757585806	956.1 hPa	21.3 C deg	1018.4 hPa	0 C deg
1757584006	955.8 hPa	21.2 C deg	1018.1 hPa	0 C deg
1757582206	955.7 hPa	21.1 C deg	1018.1 hPa	0 C deg
1757580405	955.7 hPa	21 C deg	1018 hPa	0 C deg
1757578605	955.4 hPa	21 C deg	1017.8 hPa	0 C deg
1757576805	955.1 hPa	21 C deg	1017.5 hPa	0 C deg
1757575005	954.8 hPa	21 C deg	1017.1 hPa	0 C deg
1757573205	954.5 hPa	21 C deg	1016.8 hPa	0 C deg
1757571405	954.2 hPa	21 C deg	1016.5 hPa	0 C deg
1757569602	954 hPa	21 C deg	1016.3 hPa	0 C deg
1757567802	953.7 hPa	21 C deg	1016 hPa	0 C deg
1757566001	953.7 hPa	21 C deg	1015.9 hPa	0 C deg
1757564201	953.5 hPa	21 C deg	1015.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)