SP6DWA-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6DWA-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1776531005	41 Deg.C	5 %
1776530402	41 Deg.C	5 %
1776529804	41 Deg.C	5 %
1776529202	41 Deg.C	6 %
1776528605	42 Deg.C	9 %
1776527401	40 Deg.C	5 %
1776526802	40 Deg.C	5 %
1776526204	41 Deg.C	5 %
1776525601	41 Deg.C	5 %
1776525005	42 Deg.C	5 %
1776524402	40 Deg.C	6 %
1776523805	36 Deg.C	7 %
1776514801	40 Deg.C	5 %
1776514205	40 Deg.C	5 %
1776513602	41 Deg.C	5 %
1776513005	40 Deg.C	5 %
1776512401	40 Deg.C	5 %
1776511802	40 Deg.C	5 %
1776511205	41 Deg.C	5 %
1776510601	41 Deg.C	5 %
1776510004	41 Deg.C	5 %
1776509401	40 Deg.C	5 %
1776508805	40 Deg.C	5 %
1776508201	41 Deg.C	5 %
1776507601	40 Deg.C	5 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)