KN6RO-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KN6RO-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781859864	13.65 Volt	1240 Pkt	230 Pkt	60 Pcnt
1781859265	13.65 Volt	1220 Pkt	240 Pkt	61 Pcnt
1781858664	13.65 Volt	1220 Pkt	240 Pkt	61 Pcnt
1781858064	13.65 Volt	1200 Pkt	230 Pkt	61 Pcnt
1781857464	13.65 Volt	1220 Pkt	230 Pkt	61 Pcnt
1781856864	13.43 Volt	1210 Pkt	220 Pkt	60 Pcnt
1781856264	13.65 Volt	1230 Pkt	230 Pkt	61 Pcnt
1781855665	13.65 Volt	1240 Pkt	240 Pkt	60 Pcnt
1781855065	13.65 Volt	1260 Pkt	240 Pkt	60 Pcnt
1781854465	13.65 Volt	1280 Pkt	240 Pkt	60 Pcnt
1781853864	13.65 Volt	1270 Pkt	250 Pkt	60 Pcnt
1781853264	13.65 Volt	1300 Pkt	240 Pkt	61 Pcnt
1781852664	13.65 Volt	1290 Pkt	240 Pkt	61 Pcnt
1781852068	13.65 Volt	1240 Pkt	230 Pkt	61 Pcnt
1781851465	13.65 Volt	1170 Pkt	230 Pkt	62 Pcnt
1781851371	13.65 Volt	1030 Pkt	210 Pkt	62 Pcnt
1781850865	13.65 Volt	1110 Pkt	220 Pkt	63 Pcnt
1781850264	13.65 Volt	1030 Pkt	210 Pkt	62 Pcnt
1781849664	13.65 Volt	960 Pkt	200 Pkt	63 Pcnt
1781849064	13.65 Volt	890 Pkt	200 Pkt	63 Pcnt
1781848464	13.65 Volt	890 Pkt	210 Pkt	63 Pcnt
1781847864	13.65 Volt	890 Pkt	200 Pkt	63 Pcnt
1781847264	13.65 Volt	880 Pkt	200 Pkt	62 Pcnt
1781846664	13.65 Volt	870 Pkt	210 Pkt	62 Pcnt
1781846064	13.65 Volt	870 Pkt	210 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)