K2CSN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2CSN-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1780545661	59 Pkts	59 Pkts	21 Pkts	31 C
1780543861	63 Pkts	59 Pkts	24 Pkts	31 C
1780542061	57 Pkts	57 Pkts	22 Pkts	32 C
1780540261	51 Pkts	49 Pkts	18 Pkts	32 C
1780538461	34 Pkts	31 Pkts	13 Pkts	32 C
1780536661	19 Pkts	19 Pkts	19 Pkts	32 C
1780534861	5 Pkts	5 Pkts	5 Pkts	34 C
1780533061	3 Pkts	2 Pkts	1 Pkts	35 C
1780531261	16 Pkts	15 Pkts	11 Pkts	36 C
1780529461	0 Pkts	0 Pkts	0 Pkts	39 C
1780527661	8 Pkts	3 Pkts	2 Pkts	38 C
1780167205	37 Pkts	33 Pkts	17 Pkts	32 C
1780165405	10 Pkts	7 Pkts	7 Pkts	31 C
1780163605	10 Pkts	6 Pkts	6 Pkts	31 C
1780161805	4 Pkts	3 Pkts	3 Pkts	32 C
1780160005	5 Pkts	4 Pkts	4 Pkts	31 C
1780158206	16 Pkts	11 Pkts	8 Pkts	30 C
1779753913	52 Pkts	50 Pkts	24 Pkts	34 C
1779752113	27 Pkts	26 Pkts	12 Pkts	35 C
1779750313	17 Pkts	14 Pkts	8 Pkts	35 C
1779748513	44 Pkts	42 Pkts	32 Pkts	38 C
1779746713	4 Pkts	4 Pkts	1 Pkts	36 C
1779744913	6 Pkts	6 Pkts	1 Pkts	36 C
1779743113	4 Pkts	4 Pkts	3 Pkts	37 C
1779741313	0 Pkts	0 Pkts	0 Pkts	37 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)